apache junction

Apache Junction water quality report

The Apache Junction Water District (AJWD) is pleased to present the annual drinking water quality report (Consumer Confidence Report) for calendar year 2015. This report contains important information about the quality of your drinking water.

Este informe contiene información muy importante sobre el agua usted bebe. Tradúscalo ó hable con alguien que lo entienda bien.

Why Provide a Water Quality Report?

To ensure that tap water is safe to drink, the United States Environmental Protection Agency (EPA) prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. The Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

Apache Junction Water District proudly produces a water quality report each year, so residents can learn about the health information of our water.

Where Does AJWD Water Come From?

AJWD supplies well water (groundwater) pumped from the Eastern Salt River Sub-Basin Aquifer which flows southwesterly under Apache Junction and its surrounding areas. The groundwater is treated for arsenic removal where necessary, disinfected with chlorine, pumped into

storage tanks and blended with Colorado River water transported through the Central Arizona Project (CAP) canal system and treated

at the City of Mesa’s Brown Road Treatment Plant before being introduced into the distribution system.

The water supplied by AJWD meets all State and Federal safe drinking water standards.

Please contact Frank Blanco, District Director, at (480) 982-6030 to learn

more about what you can do to help protect your drinking water sources, with any questions about the annual drinking water quality report, to learn more about our system, or to attend scheduled public meetings. We want our valued customers to be informed about the services we provide and the quality water we deliver to you every day.

Source Water Assessment

In 2004, the Arizona Department of Environmental Quality (ADEQ) completed a source water assessment (SWA) of our water system to identify potential sources of contaminants to our drinking water. In this assessment, ADEQ reviewed the adjacent land use that may pose a potential risk to our water sources.

Based on the SWA, ADEQ has given AJWD a low risk designation for our source water. A low risk designation indicates that most source water protection measures are either already implemented or the hydrogeological setting is such that it protects the source water. This assessment report provides a one time evaluation of our source water. Further source water assessment documentation can be obtained by contacting ADEQ at (602) 771-4641.

What Could Be in Sources of Drinking Water?

The sources of drinking water (both tap and bottled water) includes rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it can dissolve naturally-occurring minerals and, in some cases, radioactive materials, and can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria that may come from sewage treatment plants, septic systems, agricultural livestock operations, and
  • Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or
  • Pesticides and herbicides, which may come from a variety of sources, like agriculture, urban stormwater runoff, and residential
  • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and also may come from gas stations, urban stormwater runoff, and septic systems.
  • Radioactive contaminants, that can be naturally occurring or be the result of oil and gas production and mining

Should I Take Special Precautions for My Health?

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk.

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV-AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers.

For more information about contaminants and potential health effects, or to receive a copy of the EPA and the U.S. Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and microbiological contaminants, call the EPA Safe Drinking Water Hotline at (800) 426-4791.

Additional Health Information about Nitrate, Arsenic, and Lead

  • Nitrate: Nitrate in drinking water at levels above 10 ppm is a health risk for infants of less than six months of age. High nitrate levels in drinking water can cause blue baby syndrome. Nitrate levels may rise quickly for short periods-of-time because of rainfall or agricultural activity. If you are caring for an infant, and detected nitrate levels are above 5 ppm, you should ask advice from your health care
  • Arsenic: If arsenic is less than or equal to the MCL, your drinking water meets EPA’s standards. EPA’s standard balances the current understanding of arsenic’s possible health effects against the costs of removing arsenic from drinking water. EPA continues to research the effects of low levels of arsenic, which is a mineral known to cause cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory
  • Lead: If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. AJWD is responsible for providing high quality drinking water, but cannot control the variety of materials used in residential plumbing components. When your water has been sitting for several hours, you can reduce the potential for lead exposure

by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking.  If you are concerned about lead in your water, you may wish to have your water tested.

Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at www.epa.gov/safewater/lead.

AJWD Drinking Water Quality

AJWD routinely monitors for contaminants in your drinking water according to State and Federal standards. Samples are tested by a third party Arizona Department of Health Services Certified Laboratory.

Monitoring (Sampling) Results

The following tables show regulated substances that were required to be tested and were detected in very low levels in AJWD drinking water in 2015. AJWD monitored for many more substances which were not detected. The State of Arizona requires us to monitor certain contaminants less than once a year because concentrations of these contaminants are not expected to vary significantly from year to year or our system is not considered vulnerable

to this type of contamination.

 

 

Total Coliform Bacteria

 

MCL

 

MCLG

Highest Monthly # Highest Monthly % Sample Year  

Violation

 

Likely Source of Contamination

Apache Junction Water District < 1

Monthly

 

0

 

2*

 

NA

 

2015

 

Yes*

 

Naturally present in environment

City of Mesa Distribution System < 5%

Monthly

 

0

 

3

 

0.9%

 

2015

 

No

 

Naturally present in environment

* Violation

During the month of March 2015, AJWD experienced a Non-Acute Monthly MCL violation for total coliform. Field staff took 15 routine samples to test for the presence of coliform bacteria. Two of these samples preliminarily showed presence of total coli- form bacteria.  Confirmation samples were taken and confirmed no presence of any bacteria was found in subsequent testing.

Since the standard was that no more than one routine sample result per month may be positive for the presence of total coliforms, we were required to inform our customers through public notice, which was sent out in April 2015.

 

Unregulated Contaminant Monitoring Rule Part 3 (UCMR3)

From March 2015 through December 2015, we also monitored for unregulated substances. The Safe Drinking Water Act requires water systems to periodically assess the occurrence of unregulated contaminants in drinking water. A new list of contaminants is issued about every five years. Monitoring is performed at every location where source water enters the distribution system.

Some contaminants are also measured at points within the distribution system, where the water is  consumed.  The EPA uses this occurrence data, along with health effects studies, to determine if regulations are needed.

 

Entry Point Distribution System
Substance (Units) MCL Range (Low-High) Avg Range (Low-High) Avg Sample Year Likely Source of Contamination
Chlorate (ppb)  

NA

 

230 – 450

 

308

 

250 – 410

 

331

 

2015

Disinfection byproduct; Agricultural defoliant or desiccant
Chromium (ppb)  

100

 

ND – 1.8

 

1.2

 

.2 – 2

 

1.4

 

2015

Erosion of natural deposits; Discharge from steel and pulp mills
Chromium, Hexavalent (ppb)  

NA

 

.04 – 1.9

 

0.6

 

.13 – 1.9

 

1.4

 

2015

Naturally Occurring; Used in making steel and other alloys
Molybdenum (ppb) NA 4.3 – 8.2 5.3 4.5 – 6.5 6 2015 Naturally Occurring
Strontium (ppb) NA 970 – 1500 1096 880 – 1100 968 2015 Naturally Occurring
Vanadium (ppb) NA 1.9 – 4.1 2.6 2.2 – 3.1 2.9 2015 Naturally Occurring

 

Regulated Drinking Water Contaminants

All Following Results Meet Regulatory Standards

 

 

Parameter

 

MCL

 

MCLG

AJWD

Range (Avg)

Sample Year City of Mesa Range (Avg) Sample Year  

Likely Source in Drinking Water

INORGANIC CHEMICALS
Arsenic (ppb) 10 0 1.5 – 3.7 2015 ND – 7.3 (4.2) 2015 Erosion of natural deposits; Runoff from orchards
Barium (ppb) 2000 2000 110 2013 2.0 – 118 (12) 2015 Erosion of natural deposits; Discharge of drilling wastes
Chromium, Total (ppb) 100 100 ND—2 (1.3) 2015 ND – 19 (12) 2015 Erosion of natural deposits; Discharge from steel mills
Fluoride (Naturally Occurring)

(ppm)

 

4

 

4

 

0.42 – 0.43

 

2013

 

0.29 – 1.2 (0.50)

 

2015

Erosion of natural deposits; Discharge from fertilizer factories
Nitrate (measured as Nitrogen)

(ppm)

 

10

 

10

 

0.26 – 0.26

 

2015

 

0.24 – 3.8

 

2015

 

Runoff from fertilizer use; Leaking from septic tanks

Selenium (ppb) 50 50 3 2013 ND – 2 2015 Erosion of natural deposits; Discharge from mines
ORGANIC CHEMICALS
Toluene (ppm) 1 1 0 – 0.0006 2015 ND 2015 Discharge from petroleum factories
Xylene (ppm) 10 10 0.0005 -0.0008 2015 ND 2015 Discharge from chemical factories
RADIONUCLIDES
Alpha Particles (piC/L) 15 0 2.4 – 2.4 2014 ND – 4.4 (1.8) 2012 Erosion of natural deposits
Combined Radium (pCi/L) 5 0 ND 2014 ND 2012 Erosion of natural deposits
DISINFECTANTS & DISINFECTANT BYPRODUCTS
Parameter  

MCL

 

MCLG

Range (Highest Level) Sample Year Range (Highest Level) Sample Year Likely Source in Drinking Water
Free Chlorine Residual (ppm) MRDL

= 4

MRDLG

= 4

0.78-1.14 (0.92) 2015 ND – 2.6 (1.0) 2015 Water additive used to control microbes
Chlorine Dioxide (ppb) MRDL

= 800

MRDLG

= 800

NA 2015 <10 – 26 (NA) 2015 Water additive used to control microbes
Chlorite (ppm) 1 0.8 NA 2015 0.08 – 0.6 (0.2) 2015 Byproduct of chlorine dioxide disinfection
Haleoacetic Acids (HAA5)

(ppb)

LRAA

= 60

 

NA

 

5.7 – 11.1 (9)

 

2015

 

ND – 27 (22)

 

2015

 

Byproduct of drinking water disinfection

Total Trihalomethanes (TTHMs)

(ppb)

LRAA

= 60

 

NA

 

12.8 – 39.9 (30)

 

2015

 

1.5 – 98 (75)

 

2015

 

Byproduct of drinking water disinfection

LEAD & COPPER
Parameter AL ALG Range (90th Percentile) Sample Year Range (90th Percentile) Sample Year Likely Source in Drinking Water
Lead (ppb) 15 0 ND – 8.6 (2.4) 2013 ND – 7.6 (4.2) 2015 Erosion; Corrosion of household plumbing systems
Copper (ppb) 1300 1300 1 – 270 (220) 2013 7.5 – 163 (90) 2015 Erosion; Corrosion of household plumbing systems